Velleman GASIRON2 Manual do Utilizador descarregar pdf

GASIRON2 1 VELLEMAN

GASIRON2 – GAS SOLDERING IRON / TORCH

1. Introduction

Thank you for buying the GASIRON2! Please read the manual thoroughly before bringing this device into service.

If the device was damaged in transit, don't install or use it and contact your dealer.

2. Parts

1. Soldering tip

2. Exhaust vent

3. Ignition vent

4. Locking ring

5. Stand

6. On/off switch

7. Gas volume control

8. Gas tank

9. Refill valve

10. Nozzle

3. Assembly

• ! Always let the GASIRON2 cool down before adding or removing parts.

• ! Keep a burning or hot GASIRON2 away from flammable materials and other people!

• The soldering head (#1 to 4) can be screwed off by turning the locking ring (#4) counter clockwise.

• When working with the soldering head installed, make sure the locking ring is well fastened and the exhaust vent

(#2) faces up ; if the exhaust vent faces down, it may damage the surface underneath what you are soldering.

• The soldering tip itself (#1) can also be removed by screwing it off.

4. Use

a. Soldering Iron

1. Make sure the exhaust vent (#2) faces up.

2. Set the on/off switch (#6) to the ON position to let the gas flow.

3. Pull the soldering head forward until you can see the nozzle (#10) through the ignition vent (#3). Then light the

gas by bringing an open flame to the ignition vent.

4. Release the soldering head ; the flame will disappear inside the head and will generate heat there.

5. Set the on/off switch (#6) to OFF to extinguish the soldering iron.

b. Gas Torch

1. Remove the soldering head (#1 to 4).

2. Set the on/off switch (#6) to ON to let the gas flow and bring an open flame next to the nozzle (#10).

3. Set the on/off switch (#6) to OFF to extinguish the soldering iron.

c. Hot Blower

Screw the soldering tip (#1) off the soldering head by turning it counter clockwise. Ignition and extinguishing is the

same as for the soldering iron (§4a).

1 2 3 4 5 6 7 8 9

Resumo do Conteúdo

Página 1 - 3. Assembly

GASIRON2 1 VELLEMAN GASIRON2 – GAS SOLDERING IRON / TORCH 1. Introduction Thank you for buying the GASIRON2! Please read the manual thoroughly bef

Página 2 - GASIRON2 – GASSOLDEERBOUT

GASIRON2 2 VELLEMAN d. Flame / Heat Adjustment Adjust the gas flow by means of the gas volume control (#7). Rotate it to the + or the - to increas

Página 3 - 4. Gebruik

GASIRON2 3 VELLEMAN 3. Montage • ! Laat de GASIRON2 altijd afkoelen voor u onderdelen verwijdert of toevoegt. • ! Hou een brandende of gloeiende

Página 4 - 4. Utilisation

GASIRON2 4 VELLEMAN • Laat het gas stabiliseren voor u het gaat gebruiken na een bijvulbeurt. • Vul de soldeerbout niet in de ruimte waarin u hem

Página 5 - 5. Prescriptions de sécurité

GASIRON2 5 VELLEMAN b. Bec à gaz 1. Dévissez la tête de soudage (#1 à 4). 2. Mettrez l'interrupteur (#6) sur ON pour faire couler le gaz et

Página 6 - 3. Montaje

GASIRON2 6 VELLEMAN GASIRON2 – SOLDADOR/QUEMADOR A GAS 1. Introducción ¡Gracias por haber comprado el GASIRON2! Lea cuidadosamente las instruccion

Página 7 - 1. Einführung

GASIRON2 7 VELLEMAN e. Rellenar el depósito de gas 1. Verifique que el interruptor (#6) está en la posición OFF y que el GASIRON2 se ha enfriado

Página 8 - 4. Anwendung

GASIRON2 8 VELLEMAN 3. Montage • ! Lassen Sie den GASIRON2 immer abkühlen, bevor Sie Teile entfernen oder montieren. • ! Halten Sie einen brennen

Página 9 - GASIRON2 9 VELLEMAN

GASIRON2 9 VELLEMAN 5. Sicherheitsvorschriften und Hinweise • Der Gasbehälter des GASIRON2 darf nicht mit Alkohol oder alkoholhaltigen Flüssigkeit

Comentários a estes Manuais

Sem comentários

Velleman GASIRON2 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Ferramentas Velleman GASIRON2. Velleman GASIRON2 User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas Velleman GASIRON2