Velleman CAMCOLVC14 Manual do Utilizador descarregar pdf (Página 6)

CAMCOLVC14

20.09.2010 ©Velleman nv

• Close the rear cap [3] firmly and insert the camera [1] into the holder [4].

• Place the holder [4] in the bracket [7] or [8].

• Press and hold the power button [11] for ±2s to switch on the camera. The

camera beeps 2 times and green power LED [10] switches on.

• Press the power button [11] again to start recording. The power LED [10]

starts flashing (QVGA: slow, VGA: fast).

• To stop recording, press the power button [11] again.

• To switch off the camera press and hold the power button [11] again for ±2s.

The camera beeps once before switching off.

Playback/charging

• Switch off the camera [11].

• Unscrew the rear cap [3] and insert the included USB cable into the USB port

[16].

• Make sure the VGA/QVGA selector [13] is in the ‘VGA’ position (left) and plug

the other end of the cable into a powered USB port.

• During charging the red charge LED [9] is on. When charging is complete, it will

switch off.

• Press and hold the power button [11] for ±2s to switch on the camera.

• The computer will recognize the camera as an external storage device. You can

open files with a normal media player (format: .AVI) and move, copy or delete

them.

Playback on TV

• It is also possible to play the recorded videos directly on a TV. Connect the TRS

jack of the included AV/cable in the AV output [14] and connect the RCA

connectors to a TV set (not incl.).

• Press and hold the power button [11] for ±2s to switch on the camera.

• The number of the video is indicated at the bottom of the screen. To move to

the next video, press and hold the power button [11] for ±2s.

• Press the power button [11] to play the video on the TV. Press again to stop

playback.

7. Webcam

• Before connecting the camera to the PC, the driver software must be installed.

• Insert the included CDROM into a CDROM drive.

• Locate the file ‘STK02N x.x.exe’ (x.x = latest version) and double click it to start

the installation. Follow the instructions on the screen.

• Unscrew the rear cap [3] of the camera and remove the SD card.

• Set the VGA/QVGA selector [13] in the ‘QVGA’ position (right).

• Insert the included USB cable into the USB port [16] and the other end of the

cable into the USB port.

• Press and hold the power button [11] for ±2s to switch on the camera.

• Open ‘Control Panel’ and double click ‘Add Hardware’. Follow the instructions on

the screen to install the USB device (‘standard camera’).

• When installation is finished, the camera is added under ‘my computer’ and can

be used as a webcam.

1 2 3 4 5 6 7 8 9 10 11 ... 26 27

Comentários a estes Manuais

Sem comentários

Velleman CAMCOLVC14 Manual do Utilizador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras de vídeo Velleman CAMCOLVC14