Velleman VDP7510S2 Manual do Utilizador descarregar pdf (Página 4)

VDP7510S2_v4 HQPOWER™

6. Operation

• Power-Up

Connect the blinder to the mains. The red LED will light and the blinder will automatically self-test.

The blue signal indicator LED will only light in DMX mode. Refer to the table below to set the DIP

switches.

OFF

OFF = 0, ON = 1

Address code 10 – 11 – 12 is to select the required mode.

000 = DMX mode

001 = MASTER/SLAVE mode – auto mode

010 = MASTER/SLAVE – audio mode

011 = STAND-ALONE – auto mode

100 = STAND-ALONE – audio mode

101 = MASTER/SLAVE – auto + audio mode

110 = STAND-ALONE – auto + audio mode

111 = BLACKOUT mode

• DMX Mode

Set the address (1 to 511) using DIP switches 1 to 9.

DIP

switch

1 2 3 4 5 6 7 8 9

Address

128

264

The DMX LED will flash when the unit receives a DMX signal.

Channel

From

Description

All lamps are off.

10-channel mode: each lamp controlled separately.

100

5-channel mode: 2 lamps per channel.

101

130

2-channel mode: 5 lamps per channel.

131

160

1-channel mode: 10 lamps per channel.

161 190

4-channel mode:

channel 1 = built-in modes

channel 2 = built-in programs

channel 3 = brightness

channel 4 = speed

191 220

3-channel mode:

channel 1 = built-in modes

channel 2 = built-in programs

channel 3 = brightness

221 255

4-channel mode:

channel 1 = built-in modes

channel 2 = built-in programs

channel 3 = brightness

channel 4 = speed

• Master Mode

Select any of the 16 built-in programs using DIP switches 1 to 4.

o Auto Mode

1 2 3 4 5 6 7 8 9 ... 27 28

Comentários a estes Manuais

Sem comentários

Velleman VDP7510S2 Manual do Utilizador Página 4

Comentários a estes Manuais

Manuais e produtos relacionados com Iluminação Velleman VDP7510S2