Velleman WC3320 Manual do Utilizador descarregar pdf (Página 4)

WC3320 Rev. 02

02/12/2009 ©Velleman

6. Overview

Refer to the illustrations on page 2 of this manual.

Clock 4 LCD battery compartment

1 suspension 5 LCD reset

2 clock movement 6 outdoor temperature/trend

3 LCD controls 7 indoor temperature/trend

Sensor S4

channel selector

LCD S5

°C/°F selector

suspension S6

battery compartment

test button S7

foldable stand

clock movement (2) C manual set

A reset pins D battery compartment

B forced receiving E*

protection pin*

* Depending on the model, this pin may or may not be present.

LCD controls (3) H alarm button

F channel selector I up-button

G max/min button J down-button and °C/°F selector

LCD display (6 & 7) N link indicator

channel indication O max/min indicator

L trend indicator P °C/°F indicator

alarm indicator Q temperature indication

* Only on the OUTDOOR display (6).

7. Clock operation

Refer to the illustrations on page 2 of this manual.

Important:

Depending on the model, a protection pin may still be present to secure the movement.

Remove the protection pin before first use! Dispose of it in a safe way.

Do not attempt to reinsert the pin afterwards as this will surely damage the clock.

• Insert a battery in the battery compartment (see §10). All hands will move forward towards

12:00. Note: when the original position of the second hand is between 11:55 and 12:00, the

second hand will make a full turn before stopping at 12:00. The same happens with the minute

hand when the original position is between 11:52 and 12:00.

• Choose a location for the clock (refer to §5).

• Wait until the clock receives the synchronization signal from the master clock. This might take

up to 15 minutes. Note that the received signal is usually stronger at night time.

• Once synchronized, the hands will start moving towards the correct time.

• When the clock doesn’t receive the radio-signal, it will start running showing the wrong time.

However, it will keep attempting to synchronize.

Manual setting

• It is possible to set the time manually, e.g. for use in places where no radio-signal is received.

• Press and hold the manual set button [C]. After ±3 seconds the minutes and hour hands start

moving. Hold down the manual set button [C] and release a couple of minutes before desired

time setting. Press the manual set button [C] repeatedly until the desired time indication is

reached. When no press is detected within 7 seconds, the clock starts running.

Forced receiving

• To force the clock to synchronize, press and hold the forced receiving button [B] for ±3

seconds. The current time is stored in memory and all hands will start moving towards 12:00.

The clock attempts to synchronize with the master clock.

1 2 3 4 5 6 7 8 9 ... 25 26

Comentários a estes Manuais

Sem comentários

Velleman WC3320 Manual do Utilizador Página 4

Comentários a estes Manuais

Manuais e produtos relacionados com Relógio Velleman WC3320